Inconsistency in the strength testing of dental resin-based composites among researchers

Abstract

The aims of this paper were to review the current strength testing methods of the dental resin-based composites (RBCs) and to explore the inconsistencies with regard to strength testing among researchers.Data selection/extraction: An outline of the most relevant aspects of RBCs was created, and a subsequent literature search for articles published during last four decades (1970-2010) was conducted using the databases, namely PubMed, Science Direct and ISI Web of Knowledge.Conclusion: The literature review highlighted a lack of consensus among researchers regarding the reliability of ISO recommended three-point flexure strength testing method. Several investigators have used Weibull statistics for the analysis of RBCs strength data, however their applicability might be questioned as many RBCs contain greater resin content and may exhibit sufficient viscous deformation prior to brittle failure. In addition, variability in the selection of cross-head speed and mould material for strength testing was evident which may lead to variation in the strength data and render the interpretation difficult among researchers.

doi: http://dx.doi.org/10.12669/pjms.291.2922

How to cite this:Kumar N. Inconsistency in the strength testing of dental resin-based composites among researchers. Pak J Med Sci 2013;29(1):205-210.   doi: http://dx.doi.org/10.12669/pjms.291.2922

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.